Get the latest from The Concord Group
Share This article
Consider the following scenarios: You’ve just moved into a brand-new facility, only to find a state-of-the-art HVAC system that can’t keep up in the summer months or is driving unexpectedly high energy bills. Or perhaps you work in an older building where operating expenses continue to rise, and occupants complain about hot and cold zones. Even newly renovated spaces can encounter problems if systems aren’t properly checked after upgrades.
Building commissioning is the process that catches these problems early, verifying that every system—from HVAC and plumbing to lighting, emergency power, refrigeration, and life safety—operates as intended. But it’s not only about fixing issues after the fact; commissioning also plays an essential role in helping new facilities meet performance targets required to achieve LEED certification.
Surprisingly, many buildings have never been commissioned. Missing this step can lead to higher operating costs, inefficient systems, premature equipment failure, ongoing maintenance challenges, and even safety issues. In this FAQ, we’ll break down the most common questions about commissioning—what it is, why it matters, and how it impacts your building’s performance.
Building commissioning is the process of verifying that a building and all of its systems are designed, installed, tested, and operating as intended. It covers everything from mechanical systems like HVAC and ventilation, to electrical and lighting, building controls, plumbing, fire and safety systems, communication systems, and the building envelope (walls, roofs, windows, and doors).
The commissioning process begins by verifying that each system component meets performance requirements through inspecting the installation and conducting testing. These components are then coordinated into fully functional systems and integrated into a cohesive, optimized building. Finally, commissioning documents the entire process, establishing performance benchmarks, and creating a clear roadmap for operation, maintenance, and future upgrades.
Commissioning isn’t just a one-time check. Rather, it is a holistic approach that spans from pre-design and construction through occupancy, helping owners reduce operational costs, improve energy efficiency, enhance comfort and safety, and extend the lifespan of their building and systems.
Commissioning applies to new construction projects to ensure building systems work as designed, while retro-commissioning applies the same principles to existing buildings that were never commissioned when they were originally built. Both involve inspecting, testing, and optimizing building systems. The difference is in timing: commissioning typically occurs during design and construction, whereas retro-commissioning focuses on improving the performance of older buildings.
The main purpose of building commissioning is to ensure that a building and its systems operate as intended and meet the owner’s project requirements. It helps optimize performance, reduce costs, prevent future problems, and provide clear documentation for ongoing operations.
Commissioning can help:
Commissioning improves building efficiency, reduces operational costs, extends equipment life, enhances occupant safety, and supports sustainability goals.
Building commissioning is driven by a combination of performance goals, regulatory requirements, and operational needs. Common drivers include:
Examples of commissioning drivers in practice:
In short, commissioning projects are driven by the need to optimize performance, efficiency, and reliability, tailored to the building’s purpose and the owner’s priorities.
A commissioning report documents the entire commissioning process, verifying that building systems are installed, tested, and operating as intended. It serves as a detailed guide for owners to understand maintenance needs, system performance, and operational requirements.
The commissioning report typically includes:
Systems covered in the report include:
Essentially, the report serves as a guide for the building owner to understand maintenance and operational needs. It summarizes the commissioning process and offers an overview of findings to ensure all systems are optimized, compliant, and ready for reliable operation.
Yes, commissioning can help your organization save costs by reducing energy consumption, lowering operational and maintenance expenses, extending equipment lifespan, and improving overall building performance.
Here is an itemized summary of cost savings by utilizing the commissioning process with your building:
The frequency required for commissioning depends on a building’s age, its history, and operational needs. For most buildings, commissioning is recommended initially during construction, and then re-commissioned every 3 to 5 years. In addition, ongoing or continuous commissioning allows for continuous monitoring of the building’s performance, ensuring that its standards and requirements remain accurate and up to date.
Your building may be a good candidate for retro-commissioning if it has never been commissioned before, has increasing operating costs, frequent occupant complaints about comfort factors such as temperature or air quality, has undergone renovations, changes in use, or has systems that are malfunctioning. Consider a formal assessment by a commissioning provider to confirm your building’s suitability for retro-commissioning.
The following are common indicators that your building may be ready for retro-commissioning:
Commissioning identifies system issues early, so you can address them while they are still under warranty. Testing and verifying performance during occupancy provides detailed documentation of system function, enabling owners to hold contractors and manufacturers accountable.
Building commissioning is a collaborative process, and responsibility is shared across multiple roles.
Commissioning Management Team:
Key Pillar Team Members:
The cost of commissioning varies based on building size, complexity, and project scope, but it is typically a small percentage of total construction costs, ranging from 0.25% to 2%. While exact numbers differ, the real value comes from the return on investment: commissioning can reduce energy bills, prevent costly system failures, extend equipment life, and minimize maintenance and operational expenses. Many owners find that the savings over the building’s life far exceed the initial investment.
Yes. According to the U.S. Green Building Council, LEED certification requires a form of commissioning called Fundamental Commissioning and Verification, which is a mandatory prerequisite for all projects. This process ensures that key systems (such as mechanical, electrical, and plumbing) are installed correctly and meet the owner’s project requirements.
Projects can also pursue Enhanced Commissioning as an optional credit to earn extra points toward LEED certification. Enhanced Commissioning expands the scope to include early design review and ongoing verification for up to 10 months after occupancy, helping achieve higher energy efficiency and optimal building performance.
Absolutely. Commissioning ensures that all building systems operate as designed, which directly supports sustainability efforts. By identifying and resolving performance issues early, commissioning helps buildings meet sustainability standards, reduce carbon emissions, and achieve green building certifications such as LEED.
Yes. Commissioning optimizes building systems to create comfortable, healthy, and safe indoor environments. Properly functioning HVAC, controls, lighting, and ventilation reduce temperature inconsistencies, noise, and air quality issues—directly impacting occupant comfort and productivity. In offices, schools, or healthcare facilities, these improvements can lead to higher employee performance, fewer complaints, and better overall satisfaction.
Commissioning is fundamental to the success of a project and delivers many measurable, bottom-line benefits to owners, occupants, design and construction teams, the environment, and the general public.
For more information on how building commissioning can help you optimize your building systems, contact The Concord Group. Our team of experienced engineers and technical professionals can help you reduce your risk, mitigate critical issues, and deliver a cost-effective solution for the performance of your facilities. Our tailored approach to commissioning is geared toward efficiency and sustainability, ensuring it will have a positive outcome for your facility operations and occupants.
About The Author

Justin Johnson is Director of Building Performance Services at The Concord Group, where he leads commissioning, facility assessments, and sustainability consulting projects. With a background in mechanical engineering and years of commissioning experience, Justin ensures buildings perform to the highest standards of function, efficiency, and sustainability. He is known for his collaborative approach with clients, design teams, and contractors to deliver reliable outcomes.
Share This article

The Concord Group is a development + construction consulting firm providing a comprehensive and fully integrated suite of project management controls that mitigate risk throughout the lifecycle of a project or capital program. We specialize in Owner’s Representation, Cost Estimating, Medical Equipment Planning, and Building Performance Services (including Commissioning, Facility Condition Assessments, and Sustainability Consulting).
Since 1996, our team of highly skilled construction cost consultants, project managers, owner representatives, cost estimators, medical planners, and engineers has successfully completed over 4,000 projects throughout the United States. We have built a reputation for delivering high-quality, accurate, and timely work for governmental agencies, healthcare organizations, institutional clients, and architectural/engineering firms, along with retail, residential, and property development companies.
Get the latest from The Concord Group